Conery 2900 Float Switch – NO
$44.50 On Sale
Build any Conery 2900 Float Switch. Buy Conery 2900 Float Switch, Conery 2900 Normally Open Float Switches, Normally Open Float Switch, Mechanical Float Switch, Mercury Float Switch
The Conery 2900 Float Switch is a Normally Open Float switch that provides years of reliable pump switching, alarm indication and sump pump operation. Since 1979 Conery has been producing the highest quality Made in the USA float switches and products for the water and wastewater market. You can build and buy any Conery 2900 float switch right here at MCE Process. Because each Conery Mfg. float switch is designed and manufactured in their Ashland, OH factory, each 2900 normally open float switch has Made in the USA quality built right in. It also comes with a float switch industry leading Conery Manufacturing 3 year warranty.
Conery 2900 Float Switch Operation
The Conery 2900 Float Switch is a N/O type float switch that closes or “turns on” when the float switch rises above the actuation level. The float switch contacts then open back up once the float drops below the “turn off” point.
For Wide Angle: The float switch activates (contacts close) as the float rises 45 degrees above horizontal. The contacts then remain closed until the float switch returns to 45 degrees below horizontal.
Conery 2900 Float Switch Applications
- Sump Pump Float Switch
- Lifstation Float Switch
- High Water Tank Alarm
- Pump Station Float Switch
- Float Switch for Water
- Potable Water Float Switch
- Float Switch for Wastewater
- Sewer Float Switch
- Waste Water Float Switch
- High Water Alarm Float Switch
- Pumping Station Float Switch
- Grinder Pump Float Switch
- Sewage Pump Float Switch
- Septic Tank Float Switch
- Septic Pump Float Switch
- Sump Float Switch
- Cistern Pump Float
- Cistern High Water Float Switch
- Pump Cut-Off Switch
- Pump Cut-On Switch
- Pump Turn On Switch
- Pump On Float Switch
- Sump Pump On Switch
- Sump Pump Turn-On Switch
How to Order
You can build any float switch from Conery Mfg. right here. Use this Conery Float Switch build table to guide you through the options below.
Example: If you want to order a Conery 2900-B1-S1-C1-20.
Select B1 in Step 1
Select S1 in Step 2
Select C1 in Step 3
Select 20′ Cord Length in Step 3
10 Amps @ 120 VAC or 3 Amps @ 240 VAC Control Duty Narrow Angle Mechanical Float Switch
10 AMP @ 120 VAC or 3 AMP @ 240 VAC Control Duty Narrow Angle Mercury Float Switch
10 AMP @ 120 VAC Control Duty Narrow Angle Mechanical Float Switch
10 AMP @ 120 VAC Control Duty Narrow Angle Mercury Float Switch
13 AMP @ 120/230 VAC – 1/2HP / 1HP Pump Duty Mercury Wide Angle Float Switch
2900-B1-S4 Std bulb
2900-B2-S4 Mini bulb
2900-B1-S4-C1 Std bulb w/ cord weight
2900-B2-S4-C1 Mini bulb w/ cord weight
2900-B1-S4-C3 Std bulb w/ clamp – stainless band
2900-B2-S4-C3 Mini bulb w/ clamp – stainless band
2900-B1-S4-C4 Std bulb w/releasable tie strap
2900-B2-S4-C4 Mini bulb w/releasable tie strap
13 AMP @ 120/230 VAC – 1/2HP / 1HP Pump Duty Mechanical Wide Angle Float Switch
15 AMP @ 120/230 VAC – 1HP / 2HP Pump Duty Mechanical Wide Angle Float Switch
|Dimensions||6 × 6 × 6 in|
|Brand||Conery, Conery Mfg., Conery Manufacturing|
|Manufacturer||Conery, Conery Mfg., Conery Manufacturing|
|Cable Type||18/2 SJOW Cable (10 A) Control Duty, 16/2 SJOW Cable (1/2 HP to 1 HP), 14/2 SJOW Cable (1 HP to 2 HP)|
|Electrical Rating||B8 Wide Angle Series: 13 AMPS @ 120 VAC FOR 1/2 HP and 1 HP @ 240 VAC, 15 AMP @ 120 VAC FOR 1 HP to 2HP B8 Narrow Angle Series: 10 AMPS @ 120 VAC, 5 AMP @ 240 VAC B6 Series: 10 AMPS @ 120 VAC, 3 AMPS @ 240 VAC B3 Wide Angle Series: 13 AMPS @ 120 VAC FOR 1/2 HP and 1 HP @ 240 VAC, 15 AMP @ 240 VAC FOR 1 HP to 2HP B3 Narrow Angle Series: 10 AMPS @ 120 VAC, 5 AMP @ 240 VAC B1 Series: 10 AMPS @ 120 VAC, 3 AMPS @ 240 VAC B2 Series: 10 AMPS @ 120 VAC, 3 AMPS @ 240 VAC|
|Manufacturer Warranty||Conery Mfg Inc warrants to the original consumer that this product shall be free from manufacturing defects for three years after the date of manufacture. During that time period and subject to the conditions set forth below, Conery Mfg Inc will repair or replace, for the original consumer, any component which proves to be defective due to defective materials or workmanship of Conery Mfg Inc. This warranty does not apply to the misapplication of the products, defects or malfunctions resulting from failure to properly install, operate, or maintain the unit in accordance with the manufacturers instructions, failures resulting from abuse, misuse, accident, or negligence of the product, damage due to lightning or other “Acts of God,” or units which are not installed in accordance with applicable local codes, ordinances, or accepted trade practices. Warranty is void if installation, service, or repair of any component of the product is performed by anyone other than a licensed electrician or other qualified service personnel. It is the full responsibility of the original consumer to return defective product or component at their own expense. The consumer shall take full responsibility for the removal, shipping, and reinstallation of the product or component. To return a product under warranty, the original consumer should contact Conery Mfg Inc by telephone and request an RGA (Return Goods Authorization) form. It is the responsibility of the consumer to fill out, in completion, the form and return it with the defective products to Conery Mfg Inc. Conery Mfg Inc may also include a 15% restocking fee for non-defective products that were incorrectly ordered by the consumer. Any implied warranties of merchantability or fitness are limited to the duration of this written warranty. Conery Mfg Inc shall not, in any manner, be liable for any incidental or consequential damages as a result of a breach of this written warranty or any implied warranty. Conery Mfg Inc reserves the right to change any and all of the information contained in this warranty with no prior notice.|
Add requested items to the cart. Click “Download Quote ” button at bottom of cart.
Use our quote request form below.
Shipping Options Are Calculated in the Cart
- Add the item to the cart – “Add to Cart / Quote” button.
- Enter ship to address / ZIP / Postal Code to see the shipping options available in the CART.
- All shipping options will be displayed. FREE SHIPPING is available for select items.
- Check out the time in transit time maps here.
- Most of our orders are deliverd to our customers in 1-3 days after the carrier picks up the package.
Time Sensitive Delivery?
- Yes, please enter your UPS. FedEx, DHL or Freight / LTL Shipper account # at checkout.
- Yes, on a limited basis per product and per location. Please call first as all items are not stocked locally.
- We ship orders all over the world to most countries (180+ currently) as permitted by law.
To get an estimated international shipping cost: